Phone:  +90  (212) 2120310 Pbx. 
Fax:      +90  (212) 2119938
CCTV Systems  P/T/Z/F Telemetry  Control
PAN/TILT/ZOOM/FOCUS TELEMETRY KONTROL

The pan motor inside the classic camera scanner (Pan Scanning) 220 V for wire cable and the tilt motor
(Pan & Tilt Scanning) is rounded with 240 V 6 wire cable. Pan or pan-tilt control unit in our sector can only control 4 motors. Each pan or pan-tilt motor cable comes to the control unit separately. This situation appears because 220 V live cable is carried to the control unit, and cable burning looks as it is caused by undesired short-circuit also it will cause mounting difficulties and a lot of cables might spread about in the control room. As for the Telemetry Control Unit it is worked by two wire data+ Coax cable and 9 functional parallel connections(multidrop)
INTERFACE UNIT
PTK-01 9 FUNCTIONS TELEMETRY CONTROL

* 48 Channel Digital Addressable System P/T/Z/F Controller
* Multi-Drop Connection With 2+1Coax Cable (GND,TX,RX)
* Left, Right, Up, Down, Automatic, Zoom +,
_ Zoom - , Focus +, Focus - Functions
* 24VAC or 220VAC Triac Controller Outputs
* SMPS 110-220VAC Input, 12V 1A Camera Power Out
* All VCS Series Switcher on Controlled or 5 DIGIT LED
_ DISPLAY CONTROL MODULE and LCD Keypad Controller_

P/T/Z/F Interface
SYSTEM CONFIGURATION
2x0.22 LCCY
Data Cable
220VAC
   
1- 48 Camera Scanner
CONTROL UNIT